Condensation Drain: how the AC condensate drain line works in Marietta homes

Condensation Drain of a residential HVAC system

The condensation drain is the pan, trap and PVC line that carry water away from the evaporator coil. When it clogs, water backs up into the unit, trips a safety switch or overflows into ceilings and floors.

How it works

Water dripping from the coil collects in the primary drain pan and leaves through a ¾-inch PVC line with a trap. The trap holds a little water so the blower doesn't suck air back up the line.

Attic systems also have a secondary pan under the unit and often a float switch that cuts the system off if water rises. Water in the secondary pan means the primary drain is already blocked.

Algae and bacterial slime grow in the warm, wet line, especially in summer. A cleanout tee near the unit lets you flush it without cutting pipe.

Signs of a problem

Water in the secondary pan or around the unit
AC shuts off and won't restart (float switch)
Water stains on the ceiling below an attic unit
Musty smell near the air handler
Gurgling from the drain line

Simple upkeep

Pour a cup of white vinegar into the cleanout every 1–2 months in summer
Check the secondary pan for water during heavy cooling months
Make sure the line outlet outdoors isn't buried or blocked
Never remove the float switch to 'fix' a shutdown

The condensation drain in Marietta homes

Hot afternoons and pollen-heavy springs load filters and outdoor coils quickly, especially near wooded lots. In Marietta's mix of historic homes near the Square, 1970s–1990s two-story homes in East Cobb and newer builds toward Kennesaw, we see condensation drain issues most often in homes around Marietta Square, East Cobb, Whitlock.

What our technicians check: We vacuum the drain from the outlet end, flush the trap, confirm proper slope and test the float switch so the next clog shuts the system off instead of flooding the ceiling.